Please go to [visitor_country] store
Visit Site
ALWAYS FREE SHIPPINGWITH $60+ PURCHASE
Free shipping with cart over $60
Receive your order in 2 to 4 days
Satisfaction guaranteed or money back
Ensure your boat is clean and free of contaminants. You may want to start with a thorough washing using pH-neutral boat wash soap and a soft-bristle brush or wash mitt. Rinse thoroughly.
If your boat's surfaces feel rough, you can use a clay bar kit to remove embedded contaminants. Lubricate the surface with soapy water and gently glide the clay bar over it. Rinse and dry the surface afterward.
Use painter's tape to mask off any areas you don't want the ceramic coating to touch, such as rubber seals, plastics, and non-painted surfaces.
Shake the ceramic coating bottle well to ensure it's properly mixed.
In one of the buckets, mix a 1:1 ratio of isopropyl alcohol and water. This will be used as a panel wipe to ensure the surface is clean and free from oils or residue.
Start with a small section of your boat. Dip the foam applicator pad onto the ceramic coating and apply it in straight lines or cross-hatch patterns, overlapping each pass slightly. Apply a thin, even coat.
After applying the coating, immediately use a clean microfiber towel to level and evenly spread the coating. Use gentle, light pressure.
Continue applying and leveling the ceramic coating in small sections, ensuring it doesn't dry on the surface. Work methodically until the entire boat is coated.
After the entire boat is coated, inspect for high spots or streaks. If you notice any, use a clean, dry microfiber towel to remove them immediately.
Allow the coating to cure at least 24 hours. Keep your boat in a clean, dry area during this time to prevent contamination.
Once the coating has fully cured, inspect the boat for any imperfections and touch them up if necessary.
Regularly maintain your boat by rinsing off saltwater and cleaning with a pH-neutral boat wash soap. Avoid abrasive cleaners or brushes that could damage the coating.
I ordered 1 litre. I am a professional detailer.
I protected my 26 ft boat in less than 2 hours.
All in one kit. Easy to apply.
Reveived in 3 days.
I tested many ceramic coating. This one is really good.